Subdivision Road Construction Contractors in Riverstone, NSW
What is included
What Is Included in Our Subdivision Road Construction Contractors
- We walk the site with the plans and peg out where the road, kerbs and services will run.
- Vegetation and soil are stripped, then the road formation is cut or filled to the design levels.
- Where it is part of the job, stormwater pipes and pits go in first, bedded and backfilled in layers.
- The subgrade is trimmed and rolled to a firm, even formation, and soft spots are dug out and replaced.
- Sub-base and base gravel is spread, watered and compacted in layers, building up the pavement thickness.
- Kerb and gutter is formed along the edges, and the pavement is trimmed to the kerb line.
- Bitumen is sprayed on the prepared base, then asphalt is laid and rolled to the finished levels.
- The site is swept, the edges are cleaned up, and you are shown over the finished road.
Why us
Why Choose Us for Subdivision Road Construction Contractors?
Accountable for every job, long after the day
Every subdivision road construction job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your subdivision road construction is tested before we go, you get walked through exactly what was done.
Local asphalt contractors, not a call centre
An asphalt contractor answers the phone and the same faces come back if the job runs over a day.
How the job runs
Roads are built up in layers
The first phone call
Tell us what the subdivision is, whether it is residential or industrial, and roughly how long the road runs. We will ask who is doing the earthworks and the services, because that decides where our work starts and finishes. We may also ask whether the council has approved the road design yet.
Agreeing the scope on site
We look over the ground, the plans and the pegged levels with you, or go through the plans if you cannot meet on site. We agree which layers we build, such as formation, sub-base, base, kerb and asphalt, and what is left to others. Soft or wet ground often only shows once the soil is stripped, and we say so upfront.
The work and the handover
The machines arrive and we work through the layers in order, with each one rolled and checked before the next goes on. Other trades are often working nearby, so we keep access clear where we can. When the asphalt is down and the site is swept, we walk the finished road with you.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Related work
Other jobs we get called out for
rural road and driveway sealing
We seal gravel roads and long rural driveways with sprayed bitumen and stone chips, carried out across Sydney and its western, north-western and surrounding suburbs.
Read morebulk and detailed excavation
Bulk excavation removes large volumes of soil to reach a level, and detailed excavation digs trenches, footings and pits to a set line and depth. We carry out both across Sydney and its western, north-western and surrounding suburbs.
Read moreroad base and sub-base construction
We build the compacted gravel layers that sit under asphalt and sealed roads, driveways and car parks, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreServing Riverstone and The Surrounding Areas
Where we work
Ready when you are
Book Subdivision Road Construction Contractors in Riverstone Today
Tell us roughly how many metres long the new road is and whether the subdivision is residential or industrial. A rough figure is enough for us to start with.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
