Commercial Asphalt Contractors in Riverstone, NSW
What is included
What Is Included in Our Commercial Asphalt Contractors
- We walk the site and look at the old surface, the falls, the edges and where trucks and cars turn.
- Soft, broken or failed patches are cut out and dug back to firm ground.
- Where the base needs it, crushed rock is spread, levelled and compacted so the asphalt sits on firm ground.
- Pits, drains and existing edges are checked so water still runs off the finished surface.
- A tack coat of bitumen emulsion goes onto the base and any old edges so the new layer sticks.
- Hot asphalt is spread to the planned thickness and rolled while it is still hot.
- Joins, edges and tight corners by walls and kerbs are finished by hand and rolled.
- We sweep the area, take away the waste and walk the finished surface with you before handover.
Why us
Why Choose Us for Commercial Asphalt Contractors?
Accountable for every job, long after the day
Every commercial asphalting job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your commercial asphalting is tested before we go, you get walked through exactly what was done.
Local asphalt contractors, not a call centre
An asphalt contractor answers the phone and the same faces come back if the job runs over a day.
How the job runs
The base decides how the surface wears
The first phone call
Call us on a weekday and tell us what the site is used for and roughly how big the area is. We ask what is there now, whether it is asphalt, concrete or gravel, and whether trucks or only cars use it. That tells us what kind of job to expect before anyone drives out.
Agreeing the scope on site
We come to the site and look at the surface, the falls and the edges. Some problems only show once a patch is opened up, so we tell you what we can see and what we cannot know yet. Then we agree what gets cut out, what gets laid, and where the work starts and stops.
The day of work and handover
On the day we mark out the area, do the cutting and base work, then lay and roll the asphalt. You will need to keep vehicles off the new surface until it has cooled and set, and we tell you where to park meanwhile. At the end we go over the finished surface with you.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Related work
Other jobs we get called out for
asphalt paving and surfacing
Laying new hot asphalt over a prepared base to make a smooth, sealed surface, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreasphalt resurfacing
A new layer of hot asphalt laid over a worn or cracked surface once it has been repaired, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreroad construction and roadworks
Building new roads and carrying out roadworks, from earthworks and road base through to the asphalt or sealed surface, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreServing Riverstone and The Surrounding Areas
Where we work
Ready when you are
Book Commercial Asphalt Contractors in Riverstone Today
Type the approximate size of the area in metres into the form, for example 30 by 15. It is the first thing we need to understand how big the job is. We take it from there.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
