Asphalt contractor in St Marys, NSW

Working across St Marys

St Marys sits between South Creek on the west and Ropes Creek on the east, and the Western railway line divides it in two. North of the line the land is mostly industrial and trade, with workshops, wreckers, car dealers and waste treatment sites along Glossop and Forrester roads. South of the line it is the town centre around Queen Street and homes. That gives us two different kinds of site: hardstand yards in the north and car parks and streets in the south.

Industrial yards here have different access from a car park. A yard may have one gate, trucks moving through all day, and a manager who holds the key. We plan around those trucks, and we ask whether the work can be done in sections so part of the yard keeps running. Near the town centre, we think about pedestrians and traffic control instead. Wherever we work, we ask where the drains, stormwater pits and services run under the surface.

The suburb sits between two creeks, and council's South Creek flood study covers St Marys. Council also has overland flow plans for the Byrnes Creek and Little Creek areas, and a levee in St Marys. The creek banks have alluvial soil, which is soft when wet. Heavy truck turning areas on that kind of ground need a stiff, well drained base, or the asphalt ruts and cracks. The base is the first thing we want to see.

What we do here most

What St Marys keeps needing

North of the railway the trucks wear the surface, and south of it the creeks and drainage do, so each job starts with the base.

Commercial Asphalting

Hardstand for a workshop or wrecking yard

A yard north of the railway takes trucks, forklifts and cars, and oil on the surface softens ordinary asphalt. We look at what is dropped on the ground, how heavy the traffic is, and where the water goes. Then we set the base thickness and the mix to match. Stored parts and vehicles have to be shifted before we start.

Asphalt Pavement Restoration

Rutted truck turning areas in an industrial lot

Where trucks turn tightly on the same spot, the asphalt pushes into ruts and cracks along the wheel paths. If the base is sound, we cut out and replace only the failed surface. If the base is wet or soft, a new surface will fail again, so we dig a test section to see what is underneath before we recommend the repair.

Stormwater Drainage & Retaining Walls

Water crossing a yard towards a creek

St Marys has overland flow paths in several creek catchments, and water that crosses a yard softens the base wherever it stands. We can run new pipe and grated drains to a legal discharge point, but only after we confirm where the water goes and who owns the pipe downstream. A change to the falls may be needed to make it work.

Road Base & Sub-Base Construction

A stiff base over soft creek-bank ground

Ground near the creeks can be soft when wet, and a thin base over it will not carry trucks. We remove the soft layer if it is there, then build the base up in compacted layers. How deep we have to go only shows once we dig, so we leave that open until we have seen the ground, and say so in writing.

If it is urgent

If a pothole opens up on a St Marys street or yard

  1. 1Keep people, cars and trucks clear of the hole, and note its size, its depth and where it is, such as the street, the yard gate or the nearest intersection.
  2. 2Leave the hole alone and do not fill it with loose soil, sand or rubble, because trucks will push it out and the hole will grow.
  3. 3Tell us when you call whether the site is north or south of the railway, whether trucks use the area, and whether water lies on the spot after rain.
Call 0468 075 505

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Local, and on the phone

Tell us about your St Marys site

Type whether your site is north or south of the railway, what the surface is used for and what vehicles cross it. Heavy trucks and a town centre car park need very different bases, so that one answer sets how we plan a visit.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead