Asphalt contractor in Penrith, NSW

Working across Penrith

Penrith sits on the eastern bank of the Nepean River, about 55 km west of the Sydney CBD, on the western edge of the Cumberland Plain. Our work here sits in a mix of town centre, apartment blocks near the railway station and separate houses. Great Western Highway runs through it, and the river crossing at Victoria Bridge links it to Emu Plains. That means a lot of surfaces carry steady traffic: shopping centre car parks, side streets, driveways and the lanes behind commercial buildings.

Penrith is a busy centre, so a visit usually starts with a question about access. A car park may need to be closed in sections so customers can still get in. A street may need traffic control, and a road under the road authority or council may need their approval before we can touch it. Pits, pipes and services run under most CBD surfaces, so we want to know who holds the site key and where known services sit before a saw touches the surface.

The ground here is flat, and water does not run away quickly. The NSW Government describes the city centre as next to the Nepean River and affected by flooding up to and beyond the 1 in 100 year event. For asphalt, that makes the base and the falls the real job. A surface laid over a wet or soft base fails early, and a surface with no fall holds water. We look at both before we talk about the new surface.

What we do here most

What Penrith keeps needing

Penrith is flat ground next to a river and creeks, so water that stands on a surface is the problem behind most jobs.

Car Park Resurfacing

Worn bays and pooling in a CBD car park

A busy car park near the centre takes turning wheels in the same bays all day. The surface wears, cracks and then holds water in the low spots. We check the falls first, cut out failed patches, and then resurface in sections so part of the car park can stay open. Line marking is planned once the new surface is down.

Stormwater Drainage & Retaining Walls

Overland flow on flat ground south of the railway

Council has a floodplain plan for overland flow across the Penrith CBD and the suburbs south of the railway line. On flat ground, a blocked pit or a pipe that is too small sends water across driveways and car parks. We can lay new pipe, pits and grated drains, but we find out first where the water goes in heavy rain and who owns the downstream pipe.

Road repairs

Worn side streets that feed the highway

Streets that lead onto Great Western Highway take turning trucks and buses, and the edges and intersections wear first. Some of these roads belong to the road authority, others to council, so we ask who owns the road before anything else. Where the owner allows it, we cut out the failed section and rebuild the base before the new asphalt goes down.

Kerb & Gutter Installation

Kerb and gutter where water has nowhere to go

On flat ground a kerb with too little fall leaves a damp strip along the edge of the road. That water soaks into the road base and breaks the surface from underneath. We set out the levels before forming, so the gutter runs to a pit. Existing driveways, services and street trees are marked up first, because they decide where the line can go.

If it is urgent

If a pothole opens up on a Penrith street

  1. 1Keep people and vehicles clear of the hole, and note its size and exactly where it is, such as the side street, the nearest intersection and which lane.
  2. 2Leave the hole alone and do not fill it with loose soil, sand or gravel, because the next heavy rain will wash it out and leave a larger hole.
  3. 3Tell us when you call whether it is on a council street, a highway side street or private land such as a car park, and whether water was lying on that spot.
Call 0468 075 505

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Local, and on the phone

Tell us about your Penrith site

Type the street or car park, what the surface is doing, and whether water lies on it after rain. That tells us whether we are looking at a surface problem or a base and drainage problem before we plan a visit.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead