Asphalt contractor in Wetherill Park, NSW
Working across Wetherill Park
Most of Wetherill Park is industrial, with homes mainly in the south-east corner, and part of the Smithfield-Wetherill Park Industrial Estate lies inside it. Furniture and home-improvement stores, car mechanics and clothing factories sit among the larger sites. The Horsley Drive is the main road through the suburb, with Polding Street and Victoria Street also major roads. A large shopping centre with underground and rooftop parking and an open-air centre of big retailers add more paved area.
With so many businesses, there are a lot of driveway crossings and shared yards. Gates may be locked out of hours, and the key sits with a tenant, a landlord or an agent. Work on The Horsley Drive or the other major roads can involve traffic control, and the council or the road authority may need to be asked before anything starts. Yards carry pits, power and communications lines underground, which get located before cutting or digging.
Wetherill Park has a eucalypt-dominated landscape, including Wetherill Park Nature Reserve, and in the residential corner roots can lift kerbs and crack footpaths and asphalt edges beside street trees. On industrial lots the damage comes from trucks instead: ruts at turning points, cracking across wheel paths and ravelled surfaces where oil has softened the binder. How sound the base is only shows once the old surface is off.
What we do here most
What Wetherill Park lots keep needing
Trucks wear the industrial surfaces and tree roots work on the residential streets, so the jobs split between yards and kerbs.
Commercial Asphalting
Service lane behind large-format retail
Back lanes behind big retail frontages take delivery trucks every day, usually with tight corners and little room to move. Wear shows as ruts and edge breaks. We would check where the trucks actually track, and repair or relay those parts, planning the work around delivery times so access is kept clear.
Asphalt Profiling & Road Milling
Worn estate road before resurfacing
An estate road that has been patched many times can be too uneven to simply lay over. We mill the worn layer off to a set depth, which also keeps the finished level in line with kerbs and driveways. What is under the old layer shows once it is milled.
Kerb & Gutter Installation
Kerb lifted by eucalypt roots in a residential street
Where a gum grows beside the kerb, its roots can push the concrete up and open a gap, so water runs the wrong way and the asphalt edge breaks. We would look at the tree, the levels and the falls before deciding whether to replace the kerb and gutter, and the roots affect how it is done.
Car Park Asphalting & Construction
Extending a car park on an industrial lot
A business that takes on more staff or more trucks often needs more paved space. A new car park section starts with shaping the ground and laying compacted base, then asphalt, with falls set toward the drainage. Where it joins the old surface needs a clean, square edge so water does not get under it.
If it is urgent
If a pothole opens up on a Wetherill Park street or in a yard
- 1Keep people and vehicles clear of the hole, and note its size and exactly where it is, including the nearest driveway or street name.
- 2Do not fill it with loose soil, sand or rubble, because traffic scatters it and water gets under the edges.
- 3Tell us when you call whether it is on a public road, a private estate road or inside a yard, and whether trees stand close to the damage.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Everything we do here
Services in Wetherill Park, NSW
These are the services that suit the industrial yards, retail frontages and tree-lined residential streets of Wetherill Park.
Also nearby
We work in these suburbs too
Local, and on the phone
Tell us about your Wetherill Park site
Tell us whether the damage is on a public road, an industrial lot or a residential street. That decides who may need to be asked first and how a visit is planned. Type it in your message with the nearest cross street.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
