Asphalt contractor in Castle Hill, NSW

Working across Castle Hill

Castle Hill is about 142 metres above sea level, and at the 2021 census nearly three quarters of its homes were separate houses. The main belt of housing lies on both sides of Showground Road, between the commercial centre along Old Northern Road and a light-industrial area on the western side. East of Old Northern Road, East Excelsior has large leafy lots beside Bidjigal Reserve bushland. Hume Avenue was rezoned in 2005 for low-rise units and townhouses.

Most jobs here sit on one of three kinds of ground. House streets and driveways mean parked cars, street trees and neighbours to plan around. Unit and townhouse sites often sit behind a gate or boom, and the strata manager holds the key and decides when a car park can be closed. Showground Road and Old Northern Road carry steady traffic, so work on or near them may need traffic control and approval from council or the road authority. Gas, water, power and stormwater lines run under all of it, and we ask for plans first.

Castle Hill stands on high ground where Wianamatta shale forms the hills. That shale weathers to clay, which swells when wet, shrinks when dry and drains slowly, so water lingers in the base under a driveway or car park and softens it. The area was once orchards and market gardens before housing, shops and light industry replaced them. Where a street falls toward the bushland creeks, runoff moves quickly across the surface and works at the edges of old asphalt.

What we do here most

What Castle Hill keeps needing

On clay and slopes, water decides how long a surface lasts. Each job below is about getting water off the surface and out of the base.

Asphalt Driveway Construction

A new asphalt driveway on a sloping lot

A driveway on a slope needs a fall that carries water away from the garage and the house, not toward them. On clay, we dig out soft ground, compact a proper base and shape the surface before any asphalt is laid. The steeper the grade, the more the edges and the join at the street matter. We would walk the slope with you first.

Car Park Resurfacing

Resurfacing a unit complex car park with sunken patches

Sunken patches in a strata car park often mark places where the clay base has gone soft. We cut out those patches and rebuild them before the new surface goes over the whole area. The boom gate, resident cars and the strata manager's key all shape the staging. We plan that with the manager so nobody is parked in on the day.

Mill & Fill Asphalting

Milling a worn truck lane in a yard

In a light-industrial yard, truck wheels rut and shove the surface along the turning paths. We cut the worn layer out with a milling machine, keeping the edge square so the new asphalt has a clean joint. Then the new layer is laid to the old levels, so gates and docks still line up. Drains and pits are checked before we start.

Kerb & Gutter Installation

Replacing root-lifted kerb on a leafy street

Tree roots lift kerb and gutter until water stops running to the drain and pools against the road edge. We saw-cut the damaged length, remove it and pour new kerb to the right fall. The tree and its roots are a decision for you and council first. We only start once we know what is staying and what is going.

If it is urgent

If a pothole opens up on a Castle Hill street

  1. 1Keep people and vehicles clear of the hole, and note its size and where it sits on the street or driveway.
  2. 2Do not fill it with loose soil or sand, because on clay ground water gets under it and it washes out.
  3. 3Tell us whether it is on a house street, in a strata car park or in an industrial yard, and which way the ground falls toward it.
Call 0468 075 505

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Local, and on the phone

Planning a job in Castle Hill

Tell us whether the site is a house driveway, a strata car park or an industrial yard. That decides whether we plan around a gate and a key holder, parked cars or truck turning. Type it into the form with the street name.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead