Bulk Earthworks and Excavation Contractors in Riverstone, NSW

What is included

What Is Included in Our Bulk Earthworks and Excavation Contractors

  • We walk the area to see the ground, the slope, any overhead lines and where machines can get in.
  • Underground pipes and cables are located from plans and marked out before any digging starts.
  • Levels and dig lines are pegged or sprayed on the ground so the operator can follow them.
  • Vegetation and surface soil are stripped and set aside if they are to be reused on site.
  • The bulk is dug in layers down to the planned level, with the spoil loaded onto trucks or stockpiled.
  • Trenches, footings and pits are dug with a smaller machine or by hand, to the line and depth set out.
  • Sides of deeper cuts are sloped back or supported where the ground needs it, then the floor is trimmed level.
  • Spoil is carted away or spread and levelled, and the dug area is left tidy for the next trade.

Why us

Why Choose Us for Bulk Earthworks and Excavation Contractors?

Accountable for every job, long after the day

Every bulk and detailed excavation job is done by the people who will still be here next year.

Tested and signed off before we leave

Everything we touch on your bulk and detailed excavation is tested before we go, you get walked through exactly what was done.

Local asphalt contractors, not a call centre

An asphalt contractor answers the phone and the same faces come back if the job runs over a day.

How the job runs

Digging starts with what is underground

01

The first phone call

Tell us what is being dug and why, for example a pad for a shed, a car park level or a trench for pipes. Give us a rough length, width and depth. We will ask what the ground is like, whether it is clay, sand or rock, and whether the soil has to leave the site.

02

Agreeing the scope on site

We look at the access, the slope and any trees, pipes or cables near the dig, or go through the plans with you if there are some. We agree the levels, how the soil is handled and where the spoil goes. What the ground is really like shows once the first cuts are open, so we tell you if it changes the job.

03

The dig and the handover

The machine works across the area in passes, and trucks take the spoil away as it is dug. Detailed digging is done to the pegs and checked against the levels as we go. When the area is down to level, we trim it, clear up around it and walk it through with you.

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Ready when you are

Book Bulk Earthworks and Excavation Contractors in Riverstone Today

Tell us the size of the area to be dug in metres, length by width, and roughly how deep it needs to go. A rough figure is enough to start the conversation.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead