Asphalt contractor in Windsor, NSW

Working across Windsor

Windsor sits at the head of navigation on the Hawkesbury River, among farmland and bush on the edge of the city. It was proclaimed a town in 1810 and keeps some of Australia's oldest surviving European buildings. George Street, Johnston Street, North Street, Palmer Street and Thompson Square have heritage-listed buildings. Windsor Road is the main route in, and the 1874 Windsor Bridge was replaced by a new bridge that opened in 2020. Work here falls in old town streets, on the main road, and out on the river flats.

In the heritage streets, council may need to be asked before a surface, kerb or gutter is changed, especially near Thompson Square. Old streets are narrow, with parked cars and little room for a truck to turn, so we plan deliveries and traffic control carefully. Windsor Road has congestion concerns of its own, and the road authority may need to approve work on it. Services under old streets were laid long ago, so they are located before any cutting or digging starts.

Early settlers farmed the fertile river flats, and the town has flooded severely many times, with the 1867 flood peak marked on a pub wall in Thompson Square. SES flood planning shows roads around Windsor being cut at different river heights, so which route stays open varies from flood to flood. A road that has been under water shows it afterwards: loosened seal, scoured edges and a soft base. Checking the base matters more than patching the surface.

What we do here most

What Windsor keeps needing

Windsor combines old streets and river ground, so jobs here are about worn historic surfaces and the damage that flood water leaves behind.

Road repairs

A road edge scoured after flood water

When the Hawkesbury floods, water running across a road washes out the shoulder and strips the seal at the edge. Soft base is left under what looks like intact surface. We cut out the damaged strip back to firm material, rebuild the base, and then reseal. The size of the repair is only clear once the water has gone and the surface is open.

Rural Road & Driveway Sealing

A farm lane on the river flats

Farms on the river flats need lanes that carry vehicles across ground that is wet in some seasons. A bitumen seal over a well compacted base copes with this where bare gravel turns to mud. The drainage beside the lane decides how long the seal lasts. We need to know how long the lane is and whether it has gone under water before.

Asphalt Pavement Restoration

A worn surface in an older town street

Older town streets carry decades of patches, hairline cracking and wheel-path wear. Restoration here may mean repairing the worst areas and then resurfacing the street as a whole. In a heritage area, council may need to approve the finished look of the street first. We would want to know which street and what the surface is doing.

Stormwater Drainage & Retaining Walls

Blocked pits and silt after river water

River flooding leaves silt in pits, pipes and gutters, and the next rain then has nowhere to go. Water lies on the street and works its way into the base. We would look at which pits are blocked, which pipes are crushed, and whether the outlet is lower than the river at its high points. It needs levels measured on site.

If it is urgent

If a pothole opens up on a Windsor road after flooding

  1. 1Keep people and vehicles clear of the hole, and note its size and whether the edge of the road is breaking away beside it.
  2. 2Do not fill it with loose soil, sand or gravel, because on ground that has been wet it washes straight out again.
  3. 3When you call, tell us whether the road has been under flood water, whether it is a council street, a farm lane or Windsor Road, and whether it sits in the old town.
Call 0468 075 505

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Local, and on the phone

Tell us about your Windsor site

Tell us whether the surface has been under flood water before, and whether it is in the old town streets or out on the river flats. That decides how a visit is planned and who needs to be asked. Please type it in, there is no need to send photos.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead