Pothole Repair Contractors in Riverstone, NSW
What is included
What Is Included in Our Pothole Repair Contractors
- We find every pothole in the area and mark the soft or cracked ground around each one.
- Cones and barriers go out where the repair needs clear space.
- The edges are cut square around the hole, usually with a saw, so the patch has solid sides.
- Broken asphalt, loose stone and water are removed from the hole until we reach firm, dry material.
- If the base below has gone soft, it is dug deeper and rebuilt with compacted gravel.
- The floor and sides of the hole are swept clean and painted with a sticky bitumen coat.
- Asphalt is shovelled in, then raked level and compacted in layers if the hole is deep.
- The patch is compacted until it sits level with the old surface, and loose material is swept away.
Why us
Why Choose Us for Pothole Repair Contractors?
Accountable for every job, long after the day
Every pothole repairs job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your pothole repairs is tested before we go, you get walked through exactly what was done.
Local asphalt contractors, not a call centre
An asphalt contractor answers the phone and the same faces come back if the job runs over a day.
How the job runs
Patching a pothole starts with cutting it square
The first phone call
Tell us how many potholes there are and roughly how big the worst ones are. Tell us where they are, such as a street, a driveway, a yard or a car park. We will ask whether the surface around them is cracked or crumbling, because that changes how far we cut.
Agreeing the scope on site
We look at each pothole and the surface around it, or go through your description with you if you cannot meet us there. We agree which holes are patched and which areas have worn too far for a patch. If the road is public, the council or road authority may need to be asked first.
The work and the handover
Cones go out, then each pothole is cut, cleaned, painted with bitumen and filled with asphalt, one after another. Every patch is compacted before we move to the next. When the last one is done we sweep up, pick up the cones and show you the repaired spots.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Related work
Other jobs we get called out for
road repairs
Road repairs cut out the failed section of a road, car park or access way and rebuild it, carried out across Sydney and its western, north-western and surrounding suburbs.
Read morekerb and gutter installation
Kerb and gutter installation builds the concrete edge that holds a road or car park in and carries rainwater to the drain, carried out across Sydney and its western, north-western and surrounding suburbs.
Read morestormwater drainage and retaining walls
Stormwater drainage and retaining walls move rainwater away from paved areas and hold back sloping ground, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreServing Riverstone and The Surrounding Areas
Where we work
Ready when you are
Book Pothole Repair Contractors in Riverstone Today
Tell us how many potholes there are and roughly how wide the biggest one is, in centimetres. Add whether they are on a street, a driveway or in a car park.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
