Asphalt contractor in Smithfield, NSW
Working across Smithfield
Prospect Creek divides Smithfield. North of the creek the suburb is entirely industrial, with no housing, and part of the Smithfield-Wetherill Park Industrial Estate lies here. South of it the suburb is mostly low-density housing, and separate houses make up more than three quarters of the occupied dwellings. The Horsley Drive carries the commercial activity, and the Cumberland Highway, also called Smithfield Road, carries heavy through traffic.
Which side of the creek the job is on changes how we plan it. On the industrial side there are gates, trucks and a tenant or agent holding the key. On the housing side there are parked cars, driveways and streets with neighbours. The Cumberland Highway and The Horsley Drive may need traffic control, and the road authority may need to be asked first. Much of Blind Creek was piped underground in the late 1980s along the Cumberland Highway as the Smithfield Main Drain, and that sort of buried drainage gets considered before digging.
The streets south of the creek follow a grid plan that dates from 1838, so many roads are old. Bedrock is mainly Bringelly Shale, with alluvial deposits near Prospect Creek, and the ground nearest the creek is the most likely to be soft. Overland flow drains toward the creek, mainly along the Cumberland Highway, so water on asphalt and in kerbs is a real part of the job here. The worst flooding recorded in the suburb was in February 1990.
What we do here most
What Smithfield keeps needing
Water draining toward Prospect Creek, and a mix of old streets and heavy-truck yards, shapes almost every job here.
Stormwater Drainage & Retaining Walls
Overland water running toward the Cumberland Highway
In heavy rain, water from the catchment runs overland and gathers along the Cumberland Highway side of the suburb on its way to Prospect Creek. For a property, that can mean water pooling at a driveway or yard edge. We would look at the falls, the pits and where the water is meant to leave.
Road repairs
Worn old grid streets south of the creek
Older streets have been patched, cut for services and patched again, and the surface ends up broken into small failing sections. We look at whether the damage is only in the surface layer or runs into the base. Cracked and sunken lengths can be cut out square and rebuilt, and which parts are needed shows after the surface is removed.
Commercial Asphalting
Truck yard on the industrial side of the creek
North of Prospect Creek there are yards used only by trucks and work vehicles. The surface fails at turning points and where vehicles stand loaded. We would look at how the yard is used, and where the asphalt is rutted or cracked. The old layer is lifted and replaced, with the base checked while it is open.
Asphalt Driveway Construction
Replacing a cracked driveway on a house lot
Most homes in Smithfield are separate houses, and many have driveways with cracks, sunken wheel lines or edges breaking away. We dig out the old surface, firm the base and lay new asphalt with a fall that sends water toward the street, not at the garage. Ground nearer the creek may need more base work.
If it is urgent
If a pothole or sunken patch opens up in Smithfield
- 1Keep people and vehicles clear of it, and note how big it is and whether water is running into it.
- 2Do not fill it with loose soil, sand or rubble, because rain flushes it out and it can block a drain.
- 3Tell us when you call whether it is north or south of Prospect Creek, and whether it is on a public road, a driveway or inside an industrial yard.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Everything we do here
Services in Smithfield, NSW
These are the services that suit the drainage, old streets and heavy-truck yards found on both sides of Prospect Creek.
Also nearby
We work in these suburbs too
Local, and on the phone
Tell us about your Smithfield site
Tell us which side of Prospect Creek you are on and whether water lies on the surface after heavy rain. That decides how a visit is planned. Type it in your message with the street name.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
