Asphalt Contractors in Riverstone, NSW

Asphalting, milling, spray sealing, and road and civil construction across Sydney and the surrounding suburbs. Tell us what the surface is made of now and what is going wrong with it, and we will tell you what the job needs.

  • Family owned and operated
  • Asphalt and civil work from one business
  • Open weekdays, 8am to 5pm
A straight cut edge where new black asphalt meets older grey asphalt along a joint.

About J & E Asphalt & Civil

The business was established in 1978 and is family owned and operated. The work is asphalt and civil: laying and repairing the surface, and building what sits under it.

Most calls come down to one question. Is the surface worn out, or is the base under it failing? Resurfacing fixes the first. Only digging out and rebuilding the base fixes the second. We look at the cracking, the drainage and the edges before we say which job you have.

More about J & E Asphalt & Civil

What we do

Our Asphalt and Civil Services in Riverstone

22 of them. They run from patching a single pothole to building the roads, kerbs and drainage for a new subdivision. Each one has its own page with what is included and how the job runs.

Commercial asphalting

Asphalt surfacing for business sites such as yards, loading areas and access roads, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt paving and surfacing

Laying new hot asphalt over a prepared base to make a smooth, sealed surface, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt resurfacing

A new layer of hot asphalt laid over a worn or cracked surface once it has been repaired, carried out across Sydney and its western, north-western and surrounding suburbs.

Road construction and roadworks

Building new roads and carrying out roadworks, from earthworks and road base through to the asphalt or sealed surface, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt profiling and road milling

Grinding worn or damaged asphalt off to a set depth so the surface can be levelled and relaid, carried out across Sydney and its western, north-western and surrounding suburbs.

Mill and fill asphalting

Milling out a damaged section of asphalt and laying new asphalt in the same space so it sits level with the surface around it, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt pavement restoration

Asphalt pavement restoration is the repair of a worn or cracked asphalt surface by cutting out failed areas, fixing the base and laying new asphalt, carried out across Sydney and its western, north-western and surrounding suburbs.

Car park asphalting and construction

Car park asphalting and construction is building a new car park from the ground up, with a compacted rock base and a laid asphalt surface, carried out across Sydney and its western, north-western and surrounding suburbs.

Car park resurfacing

Car park resurfacing puts a fresh asphalt layer over a worn car park once the failed areas are repaired, and is carried out across Sydney and its western, north-western and surrounding suburbs.

Spray sealing and bitumen sealing

Spray sealing is a coat of bitumen sprayed onto a road or driveway and covered with stone chip, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt driveway construction

Asphalt driveway construction is building a new driveway on a compacted rock base and surfacing it with hot asphalt, carried out across Sydney and its western, north-western and surrounding suburbs.

Civil construction

Civil construction is the ground-level work of roads, drainage, kerbs and pavements, carried out across Sydney and its western, north-western and surrounding suburbs.

Subdivision roads

We build the new streets inside residential and industrial subdivisions, from the first cut to the final asphalt, across Sydney and its western, north-western and surrounding suburbs.

Rural road and driveway sealing

We seal gravel roads and long rural driveways with sprayed bitumen and stone chips, carried out across Sydney and its western, north-western and surrounding suburbs.

Bulk and detailed excavation

Bulk excavation removes large volumes of soil to reach a level, and detailed excavation digs trenches, footings and pits to a set line and depth. We carry out both across Sydney and its western, north-western and surrounding suburbs.

Road base and sub-base

We build the compacted gravel layers that sit under asphalt and sealed roads, driveways and car parks, carried out across Sydney and its western, north-western and surrounding suburbs.

Pothole repairs

We cut out and refill potholes in roads, driveways and car parks with compacted asphalt, across Sydney and its western, north-western and surrounding suburbs.

Road repairs

Road repairs cut out the failed section of a road, car park or access way and rebuild it, carried out across Sydney and its western, north-western and surrounding suburbs.

Kerb and gutter

Kerb and gutter installation builds the concrete edge that holds a road or car park in and carries rainwater to the drain, carried out across Sydney and its western, north-western and surrounding suburbs.

Drainage and retaining walls

Stormwater drainage and retaining walls move rainwater away from paved areas and hold back sloping ground, carried out across Sydney and its western, north-western and surrounding suburbs.

Sports court asphalting

Sports court asphalting lays a smooth, level asphalt surface that sheds water for basketball, netball, tennis and multi-use courts, carried out across Sydney and its western, north-western and surrounding suburbs.

Asphalt recycling

Asphalt recycling takes old asphalt up off a surface so it can be reused as recycled road base for new driveways, car parks and roads, carried out across Sydney and its western, north-western and surrounding suburbs.

How it works

From the first call to the finished surface

01

You call and describe it

You do not need the trade words. Tell us where the surface is, roughly how big it is, what it is used for and what is going wrong, whether that is cracking, ponding water, potholes or edges breaking away.

02

We agree the scope with you

We look at the area, or work from what you tell us, and agree what is being done, where the edges of the job sit and what is not included. If the base turns out worse than it looked, that is raised with you before the work carries on.

03

The surface is laid and handed over

The area is prepared, the new surface is laid and compacted, and the site is left clear. Asphalt needs time to cool and set before it takes traffic, so we tell you when it is safe to use rather than guessing.

Common questions

Frequently Asked Questions

Which suburbs do you cover?

We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.

What hours are you open?

We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.

What is the difference between resurfacing and mill and fill?

Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.

How do I know if I need a patch or a full rebuild?

A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.

How long before I can drive on new asphalt?

Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.

Can asphalt be laid in the rain?

No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.

What is spray sealing and when is it used?

Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.

Do you work on driveways as well as roads and car parks?

Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.

Do I need council approval before the work starts?

Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.

What should I have ready when I call?

The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.

Do you do drainage as well as surfacing?

Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.

What is asphalt profiling and road milling?

Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.

Can old asphalt be recycled?

Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.

Do you build sports courts?

Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.

What does it cost?

The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.

Got a surface that is failing?

Request Your Asphalt Quote in Riverstone

Tell us what it is, roughly how big the area is and what it is used for. That is enough to say whether it is a patch, a resurface or a rebuild.

0468 075 505

Monday to Friday 8am to 5pm, Saturday and Sunday closed

Not urgent? Send us the job instead