Road Milling and Asphalt Planing in Riverstone, NSW
What is included
What Is Included in Our Road Milling and Asphalt Planing
- We look at the old asphalt and agree the depth to be taken off before any cutting starts.
- The area to be milled is marked out, and drains, pits and covers are marked so they are not damaged.
- Where the milling stops against sound asphalt, the edge is cut square with a saw.
- A rotating drum with cutting teeth grinds the asphalt off to the agreed depth, working in strips.
- The milled material is loaded onto trucks as it comes up and taken away.
- Whatever is revealed under the asphalt is checked, and soft or damaged spots are marked for repair.
- We check the depth at kerbs and gutters so water will still drain once new asphalt goes on.
- The milled surface is swept clean and left ready for new asphalt or sealing.
Why us
Why Choose Us for Road Milling and Asphalt Planing?
Accountable for every job, long after the day
Every asphalt profiling and road milling job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your asphalt profiling and road milling is tested before we go, you get walked through exactly what was done.
Local asphalt contractors, not a call centre
An asphalt contractor answers the phone and the same faces come back if the job runs over a day.
How the job runs
Milling removes the surface and leaves the base
What needs taking off
Tell us what is wrong with the surface, such as ruts, bumps, shoving or a raised patch, and whether kerbs or pits are close by. We ask how big the area is and what comes after the milling. That decides how deep we mill and how the edges are handled.
Setting the depth on site
We look at the old asphalt and agree how deep to take it off and where the milling stops. Depth matters at kerbs, gutters and pits, because the new layer has to meet them. What is under the asphalt only shows once it is off, and we talk through that with you.
Milling day and handover
We saw the edges and set up the milling in strips. The old asphalt is ground off and carted away as it comes up. The surface is then swept, and we go through the result with you and what happens next, whether that is repairs, new asphalt or sealing.
Common questions
Frequently Asked Questions
Which suburbs do you cover?
We work across Sydney and the surrounding suburbs, and the service areas page lists twenty-one of them, from Windsor and Richmond in the north-west to Liverpool and Narellan in the south-west. If yours is not listed it is still worth asking, because the list is where we work most often rather than a boundary.
What hours are you open?
We are open Monday to Friday, 8am to 5pm, and closed on Saturday and Sunday. Ring in those hours and tell us the suburb and what the surface is used for.
What is the difference between resurfacing and mill and fill?
Resurfacing lays new asphalt over the existing surface after it has been cleaned and repaired. Mill and fill first grinds off the top layer of old asphalt, then lays new asphalt in its place, which keeps the finished level the same and removes what has worn out.
How do I know if I need a patch or a full rebuild?
A surface that is only worn or lightly cracked can often be patched or resurfaced. Cracks in a network, soft spots that move under a foot, or water that keeps coming back usually mean the base under the surface has failed, and then the base has to be dug out and rebuilt.
How long before I can drive on new asphalt?
Asphalt has to cool before it takes traffic. How long that takes depends on how thick it is laid, the weather and the mix, so we tell you on the day when it is safe to use rather than giving a number here.
Can asphalt be laid in the rain?
No. Rain and a wet surface stop the new asphalt bonding to the layer under it, so a job planned for a wet day is moved to the next dry one.
What is spray sealing and when is it used?
Spray sealing sprays a layer of bitumen onto a prepared surface and covers it with stone chips that are rolled in. It is used on rural roads, long driveways and low-traffic roads where a full asphalt surface is more than the job needs.
Do you work on driveways as well as roads and car parks?
Yes. Asphalt driveways, car parks and roads are all on our service list, and so are the roadworks and civil work that sit underneath them.
Do I need council approval before the work starts?
Work on a public road or footpath usually needs permission from the road authority first. Work on private land can need council approval depending on the job. Describe the site when you call and we can tell you what to check.
What should I have ready when I call?
The suburb, roughly how big the area is in metres, what the surface is made of now, what it is used for and what is going wrong with it. That is enough to start a conversation about the job.
Do you do drainage as well as surfacing?
Yes. Stormwater drainage and retaining walls are on our service list, and they are often part of a surfacing job, because water that sits on or under a surface is what breaks it up.
What is asphalt profiling and road milling?
Profiling uses a milling machine to grind the top off an existing asphalt or concrete surface to a set depth and level. It removes a worn layer, corrects the shape of the road, or gets the surface ready for new asphalt.
Can old asphalt be recycled?
Yes. Old asphalt that has been milled or broken out can be crushed and used again as recycled road base, so it does not all have to go to landfill.
Do you build sports courts?
Sports court asphalting is on our service list. Tell us the type of court and the size of the area, and whether it is a new base or an existing court that needs resurfacing.
What does it cost?
The cost depends on the size of the area, how thick the surface is laid, the condition of the base under it and how easy the site is to reach. No two sites are the same, so we do not publish prices. Describe yours and we will talk through what drives it.
Related work
Other jobs we get called out for
mill and fill asphalting
Milling out a damaged section of asphalt and laying new asphalt in the same space so it sits level with the surface around it, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreasphalt pavement restoration
Asphalt pavement restoration is the repair of a worn or cracked asphalt surface by cutting out failed areas, fixing the base and laying new asphalt, carried out across Sydney and its western, north-western and surrounding suburbs.
Read morecar park asphalting and construction
Car park asphalting and construction is building a new car park from the ground up, with a compacted rock base and a laid asphalt surface, carried out across Sydney and its western, north-western and surrounding suburbs.
Read moreServing Riverstone and The Surrounding Areas
Where we work
Ready when you are
Book Road Milling and Asphalt Planing in Riverstone Today
Type what is wrong with the surface, such as ruts, bumps, shoving or a worn patch. That tells us how much needs to come off. If you are unsure of the word for it, just describe what you see.
0468 075 505Monday to Friday 8am to 5pm, Saturday and Sunday closed
Not urgent? Send us the job instead
